HSDJETS Me-262 twin 90mm EDF Jet - ESC CRASH - Last Flight (English/Français)

Děkujeme! Podělte se svými přáteli!

Nelíbí sa vám video. Děkujeme za zpětnou vazbu!

Vloženo před 3 roky by

134 Zobrazení

Hi folks ????

During the assembly I saw the ESC wire from right motor was too tense/tight and I couldn’t plugged it completly, I should have put some tape on it…so check your ESC wires on your Me-262 ????
Every parts have been damaged so i will sell all the electronics, write a comment if you are interested in !

Thanks for subscribing and give her a ???????? ????

The suspensions were too stiff and I decided to remove the grease glue and cut 2,5 coils in the nose gear and 4 coils for the mains!

Thanks Paul and Yoda for your advices ????

???????? HSDJETS Me-262 twin 90mm EDF Jet PNP 1/6.5 scale
Wing 1890mm, long 1626mm, weight 5.4kg empty, with HRB 6S 5000 (2x740:1480gr) and Hacker 2S 2400 (2x130:260gr) : 7.14kg !

- Wing load 133.8 g/dm2
- Control system MFC-2085-DR
- Motor 2x 3560-1550KV outrunner
- 2x S-EDF 90mm 12 Blades (7.4 Kg of thrust, true test with 6S 5200mah 60C at 95A !!!)
- 2x ESC 100A

Book CG: 145-150mm and this flight at 150mm felt nose heavy I tried 155mm and It was better!

My rates: my low/my mid/book’s rates, my high
-Elev: 11mm (30%) / 16mm (40%) / 21mm (50%)
-Aile: 10mm (30%) / 15mm (40%) / 20mm (50%)
-Rud: 15mm (30%) / 30mm (70%) / 40mm(100%)
-Flaps: 16/32mm
-Wheels brakes at 60% (in MFC)

Mix:
-throttle to left rudder didn’t need it!

1st: HRB5000 CG145mm: 4m flight and motor: 3.87v
2nd: RT5500 45C CG145mm: 2m flight: 3.97v
3rd: RT5500 45C CG150mm: 5m10 flight: 3.87v
4th: HD4000 60C CG150mm: 3m10 flight (2m42 motor): 3.87v

Thanks https://www.turbines-rc.com for bringing this brand to France ????????

Follow me on Instagram : https://www.instagram.com/arthuraerorc