Cessna 337 / O-2A Skymaster RC Plane DIY

Děkujeme! Podělte se svými přáteli!

Nelíbí sa vám video. Děkujeme za zpětnou vazbu!

Vloženo před 3 roky by

218 Zobrazení

In the past I already made this type of model plane 2 times before, but all of them only use pusher prop motor. This is the first time I'm using twin motor for Cessna 337 Skymaster. I also designed the papercraft or paper model version of it, it's a commision project so I don't have the template for free share. But using the 3D model for the papercraft version I modify it into this RC model plane plans. It should have been a smooth process, but I made mistake on installing the tail boom. So I need to re-install the tail boom to get it right and fly good. Also I have learned that using PVC foamboard also a mistake if using for key constructions that need rigidness and strength, so the next episode I will back using 3mm plywood.

SUBSCRIBE and Like to support this channel
#cessnaskymaster #rcplane #buildvideo #radiocontrol

You can download the plans on the link below :
https://paper-replika.com/index.php?option=com_content&view=article&id=9637

Join this channel to get access to perks:
https://www.youtube.com/channel/UC64lnLfKm09f13iayaCOX0A/join

Playlist :
00:00 Intro
01:59 Wing
11:04 Twin Boom
18:35 Fuselage
30:09 Covering
37:36 Paint and Decal
42:46 Maiden Flight
55:42 Review

Specs :
1. Wingspan 1800mm / 70.8 inches
2. Flying weight : 2000 grams/ 70.5 oz
3. Wing loading :42.8 gram/dm2 - 14 oz/sq.ft.
4. Wing cube loading : 6.3
5. Wing Area : 46.74 dm2 / 724 sq.in.
6. CG : 9 cm from LE

Electronics

- 2X DXW 3536 1200kv Brushless motor
- 2X 50A ESC
- Battery Lipo 3S 2200mah 70C
- 1 metal gear 9 gram servos (micro servo)
- 3 9 gram servos (micro servo)

Materials :
1. 5mm Foamboard/ Depron/ Polyfoam
2. 3mm Plywood / PVC foam board
3. 0.5mm Mica Plastic
4. hot glue, UHU glue, CA glue
5. packing tape/ laminating film

Thanks to :
Kanaya Fellicita (camera-girl)