Aerospace Nozzle Flow Test Bench

Děkujeme! Podělte se svými přáteli!

Nelíbí sa vám video. Děkujeme za zpětnou vazbu!

Vloženo před 4 měsíci by

30 Zobrazení

About:
Aerospace Nozzle Flow Test Bench, have constant temperature refrigerated Liquid bath chiller with heater, whose size of inner chamber (500 x 400 x 400 mm//SS 304), with fluid capacity 80 Liter. This thermostatically controlled oil tank (temperature +5 to +95 degree Celsius with accuracy of +/-0.1 degree Celsius) will maintain temperature of working fluid (Turbonycoil 13 B) at 35 degree Celsius.
This thermostatically controlled oil tank (temperature +5 to +95 degree Celsius with accuracy of +/-0.1 degree Celsius) will maintain temperature of working fluid (Turbonycoil 13 B) at 35 degree Celsius.
This Bench will estimate flow rate (l.p.h) of nozzle at temperature 35 degree Celsius and working pressure (200 kpa ±10 kpa) by using Turbonycoil 13 B (oil).
This test will estimate Flow Rate and Flow Direction of oil jets/nozzle by using 3cst type oils at 98.9 degree Celsius meeting French specifications AIR 3514 or American specifications MIL-L-7808 G (TN 13 B for instance ),oil will use at a temperature 35 degree Celsius and at a pressure of 200kPa).

Technical Specification-
• Testing : Nozzle /oil jet
• Working fluid : Turbonycoil 13 B
• Flow line material : SS 304
• Main reservoir capacity : 80 lit.
• Level switch : at low point of fluid,
• Cooling : R.C.1.5 ton
• Heating : compressor
• Operating temperature : 35 °C ± 1°C
• Operating pressure : 200kPa
• Over all dimension : 1800x 1200 x2000 mm
• Equilibar : Low pressure, low flow rate
• Ball valve with actuator : normally open, single acting Spring return direction.

Application
• This Machine used for measurement of mass flow Rate and Flow Direction of oil jets/nozzle.
• This machine is used for Aviation Equipment testing.
• This machine use for various Class of Nozzle testing at specific flow rate.
• This machine is used at various pressure range

Key Features-
• Constant temperature oil tub used for maintain constant temperature
• Equilibrate controls the pressure by allowing excess flow to vent the system through the regulators outlet.
• Various interlocking provided in the system for safety purposes
• National instrument (NI) is providing in this system.
• Filters used for avoid contaminations in system.
• Ball Valve with Limit switch is used which is electrically controlled.